TEST TEST TEST

Products

Bedrock Energy Raises $24 Million to Mainstream Small-Scale Geothermal

alejandro admin

Description 2



Geothermal energy has been one of the clearest bipartisan winners of the second Trump administration’s energy policy. But the attention has largely centered on companies like Fervo Energy and Sage Geosystems, which aim to generate electricity from hot rocks often miles beneath the surface. Now, a less-heralded corner of the geothermal industry is attracting notice: ground source heat pumps, which use the stable underground temperature of the Earth to heat and cool buildings.

Texas-based startup Bedrock Energy is trying to modernize geothermal HVAC, a technology that dates back to the 1940s but still only serves about 1% of single-family homes and roughly 0.3% to 0.5% of large commercial buildings. High upfront drilling costs and space constraints have hampered adoption, as conventional systems typically require dozens or even hundreds of shallow wells spread across a sizable footprint. Bedrock just raised $24 million to scale a different approach, using AI and an array of sensors to drill fewer, deeper, and cheaper wells more quickly than ever before.

The basic idea behind geothermal heating and cooling is that once you get just a few hundred feet below the surface, the Earth stays at a relatively steady temperature year-round, typically between 50 and 70 degrees Fahrenheit. Geothermal heat pumps circulate fluid through a network of underground pipes, drawing heat from the ground to warm buildings in winter and depositing excess indoor heat underground in summer. Rather than generate heat themselves, these systems simply move it from one place to another, requiring considerably less electricity than either conventional air-source heat pumps or fossil-fuel heating systems.

As Bedrock CEO Joselyn Lai explains, the company’s drilling system captures 36 individual data points per second, helping the team gauge subsurface conditions such as the hardness and composition of the rock and how much groundwater pressure is present. When drillers encounter a new rock layer, they can see the change in real time and adjust their technique accordingly. “Kind of like a Waymo is seeing while driving, for us it’s seeing while drilling,” Lai told me. This technology enables “scientifically grounded, data-driven decisions about how to drill, so that you can overcome different challenges in the subsurface, drill faster, and drill increasingly automated.”

With conventional drilling methods, adapting to a change in subsurface conditions might take hours of troubleshooting. But Bedrock’s ability to facilitate adjustments on the fly makes it economical to drill much deeper — sometimes more than 1,000 feet — than traditional ground-source wells, which often bottom out around 500 feet. Because fewer deep wells can provide a building with the same degree of temperature control as a much larger number of shallow ones, this approach can also dramatically shrink the amount of land needed for a project.

Bedrock is also aiming to cut costs before the drilling even begins. Earlier this year, the startup introduced what it calls a “digital thermal response test,” which builds a digital twin of an entire bore field using public and private datasets alongside the company’s own drilling data from nearby sites. The model estimates the range of underground conditions developers might encounter and how effectively the ground will transfer heat. That spares developers the tens of thousands of dollars it costs to drill a test well, which can’t accurately illustrate the full range of potential conditions across a site, anyway.

“Later on, when drilling actually commences, we keep updating that digital twin with more accurate data,” Lai told me. This also allows developers to refine their project design rather than drilling extra wells to help account for uncertainty. “So this can potentially save a customer 20% to 30% on the bores that they design.”

The oil and gas industry already uses technologies like digital twins and downhole sensors, but they’re not exactly optimized for cost, Lai explained. “For decades, folks have said, Oh yeah, there’s steering and there’s downhole sensing in oil and gas. Could you use it for geo? And the answer has always been no because it’s too expensive — sometimes even 20 times too expensive for practical use.” Bedrock custom designed many of these same technologies for smaller geothermal wells, which don’t have to withstand the extreme pressures and corrosive fracking fluids that oil and gas wells do.

The tech is particularly valuable in denser urban areas where land is scarce and expensive. Larger buildings in places with more extreme climates are also promising customers, as the savings on their substantial heating and cooling needs can more quickly offset the upfront cost of geothermal drilling. That’s why Bedrock is targeting commercial buildings, from apartment complexes and office parks to data centers and schools. The company already has projects at an office campus in Austin, a resort in Utah, and a business park in Colorado, among others.

Bedrock focuses primarily on the underground portion of the geothermal system, partnering with engineering firms and HVAC contractors to install conventional ground-source heat pumps and other equipment inside buildings. And while geothermal heating and cooling typically costs more upfront than standard air source heat pumps, Lai argues this tech lasts longer and requires less maintenance. Plus, because it draws on stable underground temperatures, a ground-source heat pump typically operates more efficiently during extreme heat or cold, reducing electricity consumption and utility bills over time.

This latest funding round, co-led by new investors Clean Energy Ventures and Clearvision Ventures, comes ahead of Bedrock’s planned Series B and after its $12 million Series A early last year. The capital will help the company expand its project portfolio in Texas and the Mountain West while extending into the Northeast and Midwest. Ultimately, Lai’s goal is for geothermal heating and cooling to become as attractive an option for property owners as rooftop solar often is today.

“Every rooftop is now a contender for solar. Every parking lot, every building setback, every building footprint should be a contender for geothermal because it is really financially attractive."

Popular

Latest News